Skip to main content
Skip table of contents

Validation Authority

The following provides information for troubleshooting validation authority issues. To view general troubleshooting tips and search for troubleshooting topics, see EJBCA Troubleshooting.

Validation Authority error in the logs when publishing

Problem

I get the error message "Validation Authority ERROR, publishing is not working" in the logs

If there is an error publishing to the VA database, the VA/OCSP Responder will be out of sync with the CA. It is very important to re-synchronize the databases in that case.

In case of failure to publish to the VA database, the following error message is displayed in the server log on the EJBCA server:

Validation Authority ERROR, publishing is not working

The error message is followed by more details of the error.

The log must be monitored to discover such an error and if discovered, an alarm should notify and prompt the operator to fix the issue and then synchronize the VA database with the EJBCA database.

Solution: Manually Synchronizing the Database of the VA 

At the beginning and after a failure in publishing to the VA responder, the master database of the publishers must be synchronized with the CertificateData and CRLData table of the database of EJBCA.

If you only use OCSP and not CRL store, only the CertificateData table needs to be synchronized. If there is a single certificate out of sync, you can re-sync it by selecting Republish from the Admin GUI.

Follow the steps below to synchronize the EJBCA database with the database of a pure VA instance (for example, where all certificates are issued on another instance).

Note that the following procedure applies for MySQL, and should be adapted to your environment (database, hostnames, database name, and database credentials).

  1. Prevent any further issuing of new certificates and revocation of old certificates until the synchronization is finished, by blocking the port to the Admin GUI.
  2. To enable synchronization, run the following commands on the host of the CA. Run on the OCSP responder machine (as root user in MySQL).

    CODE
    mysql -u ejbca -p ocsp_db
    mysql> drop table CertificateData;
    mysql> drop table CRLData;
    This drops and re-creates the tables containing the certificate and CRL information.
    Run the following on the CA server:
    CODE
    mysqldump -u ejbca -p --compress ejbca_db CertificateData > CertificateData.dat
    mysqldump -u ejbca -p --compress ejbca_db CRLData > CRLData.dat
    cat CertificateData.dat | mysql -h ocspresponder ocsp_db
    cat CRLData.dat | mysql -h ocspresponder ocsp_db

    (warning) This can generally not be done from a Windows machine to a Linux machine, since Windows is not case sensitive.

  3. Check that the publishing is working before allowing issuing and revoking.
JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.