Skip to main content
Skip table of contents

Technical Specifications

The technical data of the Keyfactor Next Generation Hardware Appliance is listed below.

Technical Specifications

Form Factor

1U, Rack Unit

Dimensions

Height: 44,45 mm (1.75 inch)
Width: 430 mm (17 inch)
Depth: 447 mm (17.59 inch)

Weight

10,0 kg (22,0 lb)

Safety Agency Approval

CE

Power Supply

Redundant

AC Power

110/240 V, 50/60 Hz

Power Consumption

Idle 90 W, max 250 W

Network Ports

2 x 10 Gigabit Ethernet (GbE)

Environmental Temperature

Operational Environment

+0°C - +45°C (+32°F - 113°F)

Storage Environment*

-20°C - +60°C (+4°F - 140°F)

Protocols & APIs

Certificate Validation (OCSP/CRL)

SCEP

CMP

EST

ACME

WebServices API

REST API

Key Features for U.trust SE100/SE2K

Secure & Automated Backup Mechanism

2 Factor Authentication

FIPS 140-2 Level 3 validated HSM inside

Standard performance HSM inside

High-speed performance HSM inside

2 configurable Network Interfaces

Redundancy

SNMP, Syslog, Audit Log

Key Features for Luna S790

Secure & Automated Backup Mechanism

2 Factor Authentication

FIPS 140-3 certified

Luna HSM inside

2 configurable Network Interfaces

Redundancy

SNMP, Syslog, Audit Log

Accessories for U.trust SE100/SE2K HSM

Smart Cards

10

PIN Pad Reader

1

External Battery Adapter**

1

Accessories for Luna S790 HSM 7

Pin Entry Device (PED)

Cable, USB 2.0, Type A to Mini B connectors (for Remote PED operation)

Cable, Data, 9-pin, Micro D to Micro D connectors(for local PED operation)

1

1

1

PED Keys

10

Sheets with peel-and-stick labels for PED Keys

3

SafeNet PED Power Supply kit with replaceable mains plug modules for international use (required for Remote PED mode)

1

5

Backup HSM Device

1

Cable, USB 2.0

1

USB 3.1 Gen1 Adapter

1

For testing purposes, it is possible to run CA, VA, and RA on one single instance of the Hardware Appliance.

*Based on EJBCA Version 7.3.x, audit log on, typical key sizes (RSA 3072 SHA 384 with RSA), typical subject DN length: 100 characters. Synthetic benchmark with a certificate revoked once a second and no further system usage. Active Certificates: The number of Active certificates, where Active Certificates is the number of Issued Certificates that are not Revoked and not Expired.

**Utimaco External Battery Adapter must be provided with a battery (battery is not included) and put into immediate operation! This is absolutely necessary to support the internal battery of the HSM, even if the Hardware Appliance has not yet been put into operation or has been switched off again! 

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.